Citizen CLP-631 Specifications download pdf (Page 45)

Printer Adjustments

Ribbon Balance Adjustment

Do this adjustment by turning the front and back balance adjustment knobs.

If the ribbon is wrinkled, adjust it as follows. The scale is usually aligned with

the center.

Adjustment procedure

1. Check between the supply side ribbon and the back balance

adjustment knob to find out on which side the ribbon is loose.

Self Print Mode (p.30)

 Case of looseness on the side opposite the adjustment knob

2. Turn the front adjustment knob to the right to remove the

looseness, then make a test print to ensure that the ribbon is

not wrinkled.

If it is wrinkled, turn the back adjustment knob to the right and do the

test printing again and check to make sure that the ribbon is not wrinkled.

 Case of looseness on the adjustment knob side

3. Turn the front adjustment knob to the left to remove the

looseness, then make a test print to ensure that the ribbon is

not wrinkled.

If it is wrinkled, turn the back adjustment knob to the left and do the

test printing again and check to make sure that the ribbon is not wrinkled.

Front balance adjustment knob Back balance adjustment knob

In case the ribbon

is wrinkled

Checking which

side is loose.

Front balance ad

ustment knob Back balance ad

ustment knob

In case the ribbon

is wrinkled

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 59 60

No comments

Citizen CLP-631 Specifications Page 45