Citizen C650 Instruction Manual download pdf (Page 8)

<0-Position Correction (Setting to the Watch Base Position)>

When setting the 0-position of each hand, always make sure to turn the crown

forward (clockwise) to set each hand to its 0-position in the clockwise direction.

1. Turn the crown while in the normal position to set the mode hand to the

chronograph [CHR] mode.

2. Pull the crown out to the second click (0-position correction position).

• The second hand, minute hand, hour hand, 24 hour hand, UTC hour hand

and UTC minute hand rapidly advance to the position stored in memory.

• "HR" lights during digital display 2 indicating that the watch is in the

correction state.

3. Turning the crown forward (clockwise) allows correction to be made in the

positive direction. Turning the crown continuously allows the 0-position to be

corrected continuously.

4. Pressing button (A) switches the correction location between "MIN" (minute

hand) and "SEC" (second hand) each time it is pressed.

5. Turn the crown forward (clockwise) to align each hand at the 0-position at

each correction location. Although correction can be made in the negative

direction by turning the crown backward (counter-clockwise), always make

sure to set the 0-position by turning the crown forward to ensure that the 0-

position is set correctly.

• The 24 hour hand is corrected in conjunction with the hour hand.

<0-Position Check>

1. Turn the crown while in the normal position

to set the mode hand to the chronograph

[CHR] mode.

2. Pull the crown out to the second click (0-

position correction position).

• The second hand, minute hand, hour

hand, 24 hour hand, UTC hour hand and

UTC minute hand rapidly advance to the

0-position (12:00 position).

Note:

• When each hand is not at the 0-position,

perform the "0-position correction"

procedure. If this 0-position is out of

alignment, each hand will not indicate the

correct position.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 37 38

No comments

Citizen C650 Instruction Manual Page 8