Citizen 8203 Instruction Manual download pdf (Page 6)

Disengage

screw-lock

MON

3. Before Using

is watch is a mechanical watch (self-winding). Before using, disengage the screw

down locking crown and turn it to the right by hand to wind the watch mainspring.

When the mainspring is in the fully wound state (suciently wound), the watch will

continue to run for about 40 hours. In order to ensure that the watch continuously

provides a stable time display, always wear the watch on your wrist to keep the

mainspring adequately wound. If the watch is only worn for short periods of time,

wind the mainspring manually by turning the crown by hand.

Note:

A screw down locking crown is employed to

enhance the water resistance of the watch.

When operating the crown, rst turn it to the

le to disengage the screw lock. Once you have

nished operating the crown, always make sure

to return the crown to the normal position and

then turn it to the right while pushing it in so

that the screw lock is securely engaged.

[General Reference for Winding Mainspring when Completely Unwound]

• Aer rst loosening the screw down locking crown, turn it to the right

about 40 revolutions to fully wind the mainspring.

Keep the mainspring adequately wound either by turning the crown by hand or

by wearing the watch on your wrist for at least three hours each day.

If the watch is only worn for short periods of time, turn the crown by

hand to keep the mainspring fully wound. Since this watch employs a

slip mechanism that automatically disengages the mainspring when fully

wound, it cannot be over-wound.

1 2 3 4 5 6 7 8 9 10 11 ... 14 15

No comments

Citizen 8203 Instruction Manual Page 6