Citizen CX 165 User Manual download pdf (Page 8)

- 8 -

3.2. Set level up

After repl

acing the balance in the place of usage the balance should be leveled. The

correct leveling is shown on the level indication installed at the rear of the balance. The air

bubble should be in the centre position of the indication.

3.3. Warmin up

Before measurements user should wait untill the balance reaches temperature

stabilization. It is warming up time.

For analytical balances warming-up time is about 1 hour. This periods refers to the

balances which ware in surrounding temperature (work) before start weighing.

If the analytical balances are kept in lower temperature(for example in winter time) before

weighing the warming-up time is about 8 hours and for precision balances it is about 2

hours.

During warm-up stabilization the indications can change.

4. APPROPRATION

he balances with graphic display are used to do precise measurements in laboratories. It

is possible to do the zero function in all measure range.

The balance weights in following units:

Draw. 2. Measure units

Apart from weighing in various units the balances have additional functions as:

− counts pieces

− weights

− dosages

− determines deviations of the standard mass

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 79 80

No comments

Citizen CX 165 User Manual Page 8