Citizen CLP-8301 User Manual download pdf (Page 15)

Chapter 2 Safety Precautions

6 -

Avoid high-humidity areas

Do not put the printer in areas with high-humidity or heavy

condensation. If moisture has condensed on the printer, turn off

the power switch immediately and leave the printer for a while

until the moisture dries up. Using the printer when damp may

result in electrical shock.

Carrying

Before carrying the printer, be sure to remove the plug from the

outlet and the connecting cable to the outer equipment. If left

connected, the power cord and connecting cable may be

damaged, leading to fire and electrical shock.

Do not transport the printer while loaded with media. If media is

loaded, it may drop out, leading to injury.

When placing the printer on a floor or desk, be careful not to

catch your fingers and hands under the feet of the printer.

Power

Never operate the power switch or insert/remove the power or

data cord with wet fingers. Failure to observe this precaution may

result in electrical shock.

Power cord

Do not put a heater near the power cord. A nearby heater can

melt the power cord casing, resulting in fire or electrical shock.

When removing the plug of the power cord from the outlet, be

sure to grip the plug, not the cord, when pulling it out. Pulling the

cord may expose the core or break the wire, leading to fire or

electrical shock.

CAUTION

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 74 75

No comments

Citizen CLP-8301 User Manual Page 15