iDP-460 User’s Manual
40 CITIZEN
[Initial Value] The characters are printed after the LF command is received in the
42-columns mode.
[Sample Program] When setting the right margin to 10
ESC e 10 ; → LPRINT CHR$(&H1B)+”e10;”;
<1B>H<65>H<31>H<30>H<3B>H
[See Also] S0, S1, RS, US
ESC h (n) ; ALL
[Name] Select Character Set
[Code] <1B>H<68H>(n)<3B>H
[Domain] 0 ≤(n) ≤10 (<30>H ≤ n ≤<39>H)
[Function] This command selects the character sets of the countries listed below, depending on the
n-value.
[Caution] Be sure to add ";"(<3B>H) to the end of the parameter. As shown separately, the
character sets replace part of characters. If the n-value is specified beyond the limits,
this command will be ignored.
[Initial Value] n = 0
[See Also] 11.2 International Character Codes List
n Function
0 U.S.A.
1France
2Germany
3 U.K.
4DenmarkI
5Sweden
n Function
6 Italy
7Spain
8 Japan
9Norway
10 Denmark II
Comments to this Manuals