Citizen B11 Specifications download pdf (Page 14)

2928

After performing the all-reset procedure, align the second and minute hands at

their reference positions by pulling out the crown to the second click, and the hour

hand and date to their reference positions by pulling out the crown to the first

click.

1. Align the second and minute hands at the 12:00 position with the crown pulled

out to the second click.

(1) Turning the crown to the right moves the second and minute hands forward.

(2) Turning the crown to the left moves the second and minute hands back-

ward.

*Turning the crown continuously causes the hands to advance rapidly. Turn

the crown to the left or right to stop the hands from advancing rapidly.

10. Reference Position Alignment

9. All-Reset

The display of this watch may not read correctly as a result of being subjected to

the effects of static electricity or strong impact and so forth. When this happens,

perform the procedure described in "10. Reference Position Alignment" after per-

forming the all-reset procedure described below.

1. Pull out the crown to the second click.

* The second hand moves to the 0-position stored in memory and stops.

2. Continuously press button (A) for at least 1 second.

* The second and hour hands perform a demonstration movement (forward move-

ment → backward movement →forward movement). This completes the all-

reset procedure. Always make sure to perform the reference position align-

ment procedure after performing all-reset.

Note: Demonstration movement is not performed when the watch is insuffi-

ciently charged. Perform the all-reset procedure only after charging the

watch sufficiently.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19

No comments

Citizen B11 Specifications Page 14