Citizen B11 Specifications download pdf (Page 15)

3130

Note (2): The second hand will continue to remain stopped even if the crown is

returned to the normal position unless the reference position align-

ment procedure is performed.

6. After performing the reference position alignment procedure, properly reset the

time and date.

*The watch shows 12:00 AM for the time of reference position alignment after

the all-reset procedure has been performed. Set the time and date by referring

to "3. Setting the Time and Date" while being careful not to incorrectly set AM

and PM.

2. Align the date between the 31st and 1st and

the hour hand at the 12:00 position with the

crown pulled out to the first click.

(1) Turning the crown to the right causes

the hour hand to move forward.

(2) Turning the crown to the left causes the

hour hand to move backward.

3. The date moves with the hour hand. Con-

tinuously move the hour hand to set the date

between the 31st and 1st.

4. Align the hour hand at 12:00.

5. After each hand and the date have been set, return the crown to the normal

position.

Note (1): It takes about 1 second for the watch to store the reference position in

memory. Once the reference position has been stored in memory, the

second hand will begin irregular two-second interval movement. The

reference position may not be stored in memory if the crown is oper-

ated before the start of irregular two-second interval movement after

returning the crown to the normal position.

CITIZEN

1 2 ... 10 11 12 13 14 15 16 17 18 19

No comments

Citizen B11 Specifications Page 15