Citizen CLP 6002 User Manual

E N G L I S H User’s Manual CLP 1001, 2001 CLP 6001, 6002, 6401 CLP 7201e, 7202e

E N G L I S H FRONT VIEW n Control panel The printer has two LED indicator lights and an LCD screen that displays printer messages. 1. LEDs : One L

E N G L I S H 1.3 Connection to Power CAUTION Always use an AC outlet that accepts a three-pronged plug. Otherwise, static electricity may

E N G L I S H Chapter 2 – The Control Panel 2.1 Control Panel The control panel on the front of the printer consists of three control keys (Pause, Fe

E N G L I S H thermal or thermal transfer printing, tear mode, etc. To enter the printer setup mode, press and hold down the Pause key then press th

E N G L I S H 2.4 Self-Test Mode And Hex Dump The printer enters the self-test mode when the Feed key is pressed and held down while turning the pri

E N G L I S H PE 3.05vS/I Init S Maint BL 3.05v2.6 Adjusting the sensors for different media The voltage setting mode, part of the system setting m

E N G L I S H Chapter 3 – Paper & Ribbon 3.1 Media Installation CAUTION Take care not to trap lose clothing in the mechanism of the prin

E N G L I S H 3.2 Ribbon Installation (CLP 2001, 6001, 6002, 6401) CAUTION Be careful of the edges of the plates so injury or property dama

E N G L I S H 3.3 Ribbon Installation (CLP 7201e, 7202e) CAUTION Be careful of the edges of the plates so injury or property damage is poss

E N G L I S H 3.4 Media Thickness Adjustments CAUTION Ensure the print head adjustments are made correctly according to the type of media

E N G L I S H CE marking shows conformity to the following criteria and provisions: Low Voltage Directive (73/23/EEC)/EN60950 EMC Directive (89/336

E N G L I S H 3.5 Media Width Adjustments CAUTION Ensure the print head adjustments are made correctly according to the type of media (thick

E N G L I S H 3.6 Ribbon Tension Adjustments (CLP 2001, 6001, 6002, 6401) When the ribbon slips or wrinkles during printing, adjust the ribbon ten

E N G L I S H 3.7 Ribbon Tension Adjustments (CLP 7201e, 7202e) The CLP 7201e and 7202e feature an automatic ribbon tensioning system to keep even

E N G L I S H 3.8 Adjustable Media Sensor The adjustable media sensor is standard on the CLP 6001, 6401 and 7201e models. It can be fitted as an

E N G L I S H Chapter 4 – Troubleshooting 4.1 Error Messages When there is a problem with the printer, a buzzer sounds, and the error lamp on the con

E N G L I S H 4.2 Print Troubleshooting Switch on the printer whilst holding down the FEED key until “PrntTest” is displayed. A sample output is

E N G L I S H 4.3 Interface Troubleshooting Any interfacing problems can generally be fixed by simply double checking that the interface connectors a

- i - E N G L I S H The following symbols are used in this manual. For the safe operation of your printer, please read the following impor

E N G L I S H 13. Except as explained elsewhere in this manual, don't attempt to service or disassemble this product yourself. Opening and r

- iii - E N G L I S H Table of Contents Chapter 1 – Printer Setup ...

E N G L I S H Chapter 1 – Printer Setup 1.1 Confirmation of Carton Contents CAUTION Be careful when moving or carrying the printer and when taki

E N G L I S H 1.2 Part Names and Functions INSIDE VIEW: CLP 7201e CLP 7202e INSIDE VIEW: CLP 6001 CLP 6002 CLP 6401 15673

E N G L I S H INSIDE VIEW: CLP 1001 CLP 2001 n (1) Cover: Opens to allow loading of the media and ribbon. (2) Control panel: To se