Citizen CT-S2000L User Manual download pdf (Page 4)

CT-S2000 Service Manual

INTRODUCTION

This manual describes the disassembly, reassembly, and maintenance procedures of the line thermal printer

CT-S2000.

1. DISASSEMBLY AND REASSEMBLY

Notes the following items when maintaining the printer.

• Do not disassemble, reassemble, or adjust the printer unnecessarily when the printer operation is satisfactory.

• Do not loosen the screws fixing each component carelessly.

• After finishing inspection, perform checking for normality before turning on the printer.

• Pay attention not to leave the part or screws used for maintenance inside the printer.

• When handling the print head and electronic components, pay attention to static electricity.

• When disassembling or reassembling the printer, check the wiring and cord for damage. Pay attention not to

lay the wiring and cord by force.

• Lubricate the components as necessary when reassembling them.

1.1 Tools Used

• Phillips screwdriver #0, #1, and #2

• Tweezers

• Long-nose pliers

• Oil brush

• Nipper

1 2 3 4 5 ... 31

No comments

Citizen CT-S2000L User Manual Page 4