Citizen CT-S2000L User Manual download pdf (Page 6)

CT-S2000 Service Manual

(4) Removing Power Unit

• Remove the power connector on the UNIT MAIN PWB.

(Be sure to remove the connector lock in advance)

• After removing the cable from fixed cable slot, remove

the power unit.

(5) Removing the mechnizam unit

• Remove three screws M3×6 (ST).

(Two locations at top front, one at the rear bottom)

• Remove all connectors on UNIT MAIN PWB.

• Lifting the front portion, remove hooking at FRAME

and BOTTOM squre holes. Then, remove mechanism

unit.

(6) Removing UNIT MAIN PWB

• Remove two screws M3×6 (ST).

• Remove power switch from switch guides on FRAME

and BOTTOM, then remove UNIT MAIN PWB.

Power connector

Fixed cable slot

Square holes for latching

Power unit

M3×6 (ST)

• Mark connectors before removing for identification since same

connectors may be used.

• Be careful to remove another connector that is additionally located at the

left side.

1 2 3 4 5 6 7 ... 31

No comments

Citizen CT-S2000L User Manual Page 6