Citizen Eco-Drive WR100 AT0550-11X Specifications download pdf (Page 8)

1716

[Hint for Accurately Setting the Time]

After stopping the second hand at the 0 seconds position, turn the minute hand

4-5 minutes past the correct time and then turn it back to the correct time. The

time on the watch can then be set to the correct time by pushing in the crown in

synchronization with a time service tone.

[Setting the Date]

1. Pull the crown out to the date correction

position.

2. Turn the crown to the right to set the date.

• The crown turns freely and the date does

not change if the crown is turned to the left.

• If the date is set while the time on the

watch is between the hours of about 9:00

PM and 1:00 AM, the date may not change

on the following day. If this happens, set

the date after temporarily moving the hands

to a time other than between the above

times.

• The date is based on a 31-day calendar. The date must be changed from

the last day of the month to the first day of the following month for those

months not having 31 days (months having 30 days and February).

• The date changes at around 12:00 AM.

3. Once the date has finished being set, return the crown to the normal

position.

Date correction position

Date

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

Citizen Eco-Drive WR100 AT0550-11X Specifications Page 8