Appendixes
75
2 Specifications
●
●●
●
Cut Position Adjustments
・
The cut position can be specified with the ‘fnnn’ of the system-level commands. When the
tear-off function is turned on, the following initialization value is set in the printer.
Initialization value: fnnn = f735 (73.5 mm)
The values higher or lower will increase or decrease the amount of feed in the tear-off.
・
Parameter initialization values
Initialization values of print and feed positions by each operating mode are described below.
unit: mm (in)
Normal
printing
Auto-
cutter
Peeling Tear-off
Minimum
value
Print position
(Onnnn, form
offset)
55.9(2.2)
55.9(2.2) 55.9(2.2) 55.9(2.2)
12.7(0.5)
Feed position
(fnnn)
55.9(2.2) 86.4
(3.4)
68.6
(2.7)
73.7
(2.9)
12.7
(0.5)
Paper position sensor
Onnnn: Paper position setting
fnnn: Feed position setting
Fnnn <= Onnnn
Feed or back-feed is not
performed
Fnnn > Onnnn
-
Print head
Onnnn
fnnn
Cutter
Peeler
Tea
-off
Comments to this Manuals