Citizen CLP-7401 User Manual download pdf (Page 35)

Chapter 2 Printer Operation

6 Returning to Factory Setting

To return the configuration already set in the printer setup mode or system maintenance mode to

the factory setting, proceed as follows:

Turn off the power switch. Press and hold the Pause, Feed and Stop keys simultaneously while

turning on the power switch, and further continue holding down those keys.

Printer setup mode System maintenance mode

Mode item Indication Mode item Indication

Printing mode Transfer Baud rate 9600bps

Peeling sensor PeelOFF Data length 8bits

Auto-cutter CutOFF Native NativeON

Tearing TearOFF Feed amount fVirtual

Sensor selection Edge Command code CmndSTD

Interpreter INTP STD Adjustable sensor AJSensOF

¾ ¾ Voltage setting PE *.**V

Press and hold those keys

simultaneously while turning on

the power switch

S/I Init

S Mainte

You hear a ‘Pi’ sound. Further continue

holding down those keys

When you again hear a ‘Pi’ sound,

the operation is completed

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 83 84

No comments

Citizen CLP-7401 User Manual Page 35