Citizen CT-S300 User Manual download pdf (Page 34)

— 29 —

GS B n

[Function] Specifying/canceling the black/white inverted printing

[Code] <1D>H<42>H<n>

[Range] 0 n 255

[Outline] This command specifies or cancels the black/white inverted printing.

•“n” is valid only for the lowest bit (n0).

• Control by the lowest bit (n0) is shown as follows:

n0 Function

0 The black/white inverted printing is canceled.

1 The black/white inverted printing is specified.

[Caution] • The black/white inversion works on internal and downloaded characters.

• The black/white inversion works also on the right spacing of characters defined by

ESC SP.

• This command does not affect the bit image, downloaded bit image, bar code, HRI

characters, or the skip area specified by HT, ESC $, or ESC \.

• This command does not affect the space between lines.

• Black/white inversion specification takes precedence over underline specification.

Underline printing specified is, therefore, nullified if black/white inversion is

specified; the underline setting, however, remains unchanged.

[Default] n = 0

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 157 158

No comments

Citizen CT-S300 User Manual Page 34