Citizen CT-S300 User Manual download pdf (Page 39)

— 34 —

ESC T n

[Function] Selecting the character printing direction in PAGE MODE

[Code] <1B>H<54>H<n>

[Range] 0 n 3

48 n 51

[Outline] Selects the direction and start point of character printing in PAGE MODE.

[Caution] • When STANDARD MODE is selected, this command only executes the internal

flagging of the printer without affecting the printing in STANDARD MODE.

• The character mapping position will be the start point of the print area specified by

ESC W.

• The basic calculation pitch (x or y) used by the following commands varies with the

start point.

(1) If the start point is the top left or bottom right (The characters are mapped in

the direction perpendicular to the paper feed),

• Commands using x: ESC SP, ESC S, ESC \

• Commands using y: ESC 3, ESC J, GS $, GS \

(2) If the start point is the top right or bottom left (The characters are mapped in

the paper feed direction),

• Commands using x: ESC 3, ESC J, GS $, GS \

• Commands using y: ESC SP, ESC S, ESC \

[Default] n = 0

[See Also] Appendix 4.1 “Explanation on PAGE MODE”

ESC $, ESC L, ESC W, ESC \, GS $, GS P, GS \

n Printing Direction Start Point

0, 48 Left to right Top left (“A” in the figure)

1, 49 Bottom to top Bottom left (“B” in the figure)

2, 50 Right to left Bottom right (“C” in the figure)

3, 51 Top to bottom Top right (“D” in the figure)

Paper feed direction

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 157 158

No comments

Citizen CT-S300 User Manual Page 39