PN 4237242C
4.20-1
SERVICE AND REPAIR PROCEDURES
TRAVERSE MOTOR
4
4.20 TRAVERSE MOTOR
Tools/Supplies Needed
B #2 Phillips-head screwdriver
B 1/4 in. nut driver
B DOW CORNING 33 Lubricant, PN 1604007-D
Removal
1. Turn OFF the instrument’s power.
2. Open the lower chassis, as directed under Heading 4.4, to completely expose the
Probe/Wipe Traverse Assembly.
3. Remove the access cover at the top of the Syringe Assembly (Figure 4.20-1).
Figure 4.20-1 Traverse Motor
REAR OF TRAVERSE ASSEMBLY
7242041
ACCESS
COVER
TRAVERSE
MOTOR
TRAVERSE
MOUNTING
BRACKET
MOUNTING
POSTS
RIBBON
TUBING
PHILLIPS-HEAD
SCREWS
FLATHEAD
SCREW
VACUUM
REGULATOR
Comments to this Manuals