Citizen CLP-7401 User Manual download pdf (Page 58)

Chapter 5 Troubleshooting

Pause

Pause command

reception

(communication

control)

Same as above.

1 Error

Messages

Indication Description Corrective actions

OverHeat

Cooling

Head overheat Wait until the head temperature goes down.

When the temperature becomes low, the

remaining printing resumes.

Stop Stop key pressed Enters a pause after displaying ‘Stop’ by the

Stop command.

If the Pause key is pressed, the printing will

resume.

If the Stop key is pressed again, the stored

printing contents are discarded and ‘ON LINE’

turns on.

Cancel Stop command

reception

(communication

control)

Displays ‘Stop’ by the stop command,

discards the remaining printing contents, and

enters pause.

If the Pause key is pressed, ‘ON LINE’ will turn

on.

HeadOpen Mechanism head

open

Close the mechanism head.

PaperEnd Paper end (paper

out)

Install the paper.

PaperErr Paper out (paper

position cannot be

detected)

Check the contents and clear with the Stop

key.

Correct the faulty setting of the paper

detection (paper gap, black line, continuous

paper).

Correct the faulty parameter for paper (max.

length, continuous paper).

Adjust the sensor or change to the paper that

can accept the paper position detection.

Specify the detection miss checking length

with the M command.

When the paper position cannot be detected

during paper feeding by the specified length, it

is judged error. Generally specify the length

about three times the label length.

In case of continuous paper, specify the label

length with the C command.

Difference between the maximum and

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 83 84

Comments to this Manuals

No comments

Citizen CLP-7401 User Manual Page 58

Comments to this Manuals

Related products and manuals for Print & Scan Citizen CLP-7401