Citizen PPU-700II Specifications download pdf (Page 17)

- 15 -

ESC J n

[Function] Printing and feeding paper in minimum pitch

[Code] <1B>H<4A>H<ｎ>

[Range] 0≦ｎ≦255

[Outline] Prints the data held in the print buffer and feeds paper by [n basic calculation pitch] ・

inches.

[Caution] • After this command is executed, the beginning of the line is taken as the start position

for the next print.

• The line feed width can be set separately for the STANDARD and PAGE MODES.

• This command does not affect the line feed width defined by ESC 2 or ESC 3.

• The basic calculation pitch is set by GS P.

• Fractions resulting from calculation are corrected with the minimum pitch of the

mechanism, and the remainder is omitted.

• In STANDARD MODE, this command uses the vertical (paper feed direction) basic

calculation pitch (y).

• In PAGE MODE, this command acts differently depending on the start point:

(1) If the start point specified by ESC T is top left or bottom right, the command

uses the vertical (paper feed direction) basic calculation pitch (y).

(2) If the start point specified by ESC T is top right or bottom left, the command

uses the horizontal (perpendicular to the paper feed direction) basic calculation

pitch (x).

• The maximum settable line feed width is 1016 mm (40 inches). A setting greater than

this maximum is trimmed to the maximum.

[Default] The initial value is not defined.

[Sample Program]

Refer to Sample Program and Print Results for ESC 2.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 199 200

No comments

Citizen PPU-700II Specifications Page 17