Citizen PPU-700II Specifications download pdf (Page 52)

- 50 -

2.2.5 Bit Image Commands

ESC * m n1 n2 [d]k

[Function] Specifying the bit image mode

[Code] <1B>H<2A>H<m>H<n1><n2>[<d>] k

[Range] m＝0, 1, 32, 33

0≦n1≦255

0≦n2≦2

0≦d≦255

ｋ＝n1＋256×n2（m＝0, 1）

ｋ＝（n1＋256×n2）×3（m＝32, 33）

[Outline] • According to the number of dots specified in “n1”, “n2”, specify the bit image of mode

“m”.

• The number of dots printed is divided by 256, whose quotient is taken as “n2” and

residual as “n1”. The total number of dots printed in the horizontal direction is equal

to “n1 + (256 n2)”.・

• When bit image data have been input in excess of dot positions that can be printed on

one line, the excess data are discarded.

•”d” is bit image data. Bits to be printed are specified as “1” and those not as “0”.

• The bit image modes specified by “m” are shown as follows:

Vertical Direction Horizontal Direction

m Mode No. Dot No. Density of Dots Density of Dots Dot Max.

0 8-dots single density 8 67DPI 101DPI 288

1 8-dots double density 8 67DPI 203DPI 576

32 24-dots single density 24 203DPI 101DPI 288

33 24-dots double density 24 203DPI 203DPI 576

[Caution] • When the value of “m” is out of the above range, the data following after “n1” is

processed as normal printing data.

• After completion of bit image printing, the printer returns to normal data processing

mode.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 199 200

No comments

Citizen PPU-700II Specifications Page 52