Citizen PPU-700II Specifications Page 173

  • Download
  • Add to my manuals
  • Print
  • Page
    / 200
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 172
- 171 -
4. APPENDIX
4.1 Explanation on PAGE MODE
4.1.1 Overview
The printer has two print modes: STANDARD and PAGE.
In STANDARD MODE, the printer prints or feeds paper each time it receives a print or paper feed
command. In PAGE MODE, when the printer receives print commands and/or form feed commands,
it simply forwards them to the specified print area of memory. Only when an ESC FF or FF is
executed, all the data mapped in the print area will then be printed in a batch.
For example, suppose you executed a print and line feed for data “ABCDEF”<LF>. In STANDARD
MODE, the data “ABCDEF” is printed and paper is advanced one line. In PAGE MODE, the data
“ABCDEF” is written in the specified print area of memory, and the memory location for the storage
of the next print data is shifted one line.
The printer enters PAGE MODE with an ESC L, so that all commands received after that point are
handled in PAGE MODE. When an ESC FF is executed, the data received until then is printed in a
batch. When an FF is executed, the data received until then is printed in a batch, after which the
printer returns to STANDARD MODE. An ESC S causes the printer to immediately return to
STANDARD MODE; any print data, however, that has been stored in PAGE MODE is not printed.
Instead it will be cleared.
[Switching Between STANDARD MODE and PAGE MODE]
4.1.2 Values Set by Each Command in STANDARD MODE and PAGE MODE
(1) The values set with commands are common to the STANDARD MODE and PAGE MODE. The
values set with any of the commands listed below are, however, treated differently and stored
separately for the STANDARD and PAGE MODES.
• ESC SP, ESC 2, ESC 3, FS S
(2) The maximum printable size of a bitmap image is 576 dots for STANDARD MODE. In PAGE MODE,
the maximum printable size of a bitmap image is 831 dots in the “y” direction (paper feed
direction).
(However 831 dots are reserved for “y” of the print area set by ESC W and the value of print
direction “n” specified by ESC T is 1 or 3.)
STANDARD MODE PAGE MODE
ESC L
ESC FF
Print
FF
ESC S
Print
Page view 172
1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 199 200

Comments to this Manuals

No comments