Citizen PPU-700II Specifications download pdf (Page 39)

- 37 -

ESC T n

[Function] Selecting the character printing direction in PAGE MODE

[Code] <1B>H<54>H<n>

[Range] 0≦ｎ≦3, 48≦ｎ≦51

Printing

Direction

Start Point

0,48 Left to right

Top left

(“A” in the figure)

1,49 Bottom to top

Bottom left

(“B” in the figure)

2,50 Right to left

Bottom right

(“C” in the figure)

3,51 Top to bottom

Top right

(“D” in the figure))

[Outline] Selects the direction and start point of character printing in PAGE MODE.

[Caution] • When STANDARD MODE is selected, this command only executes the internal flagging

of the printer without affecting the printing in STANDARD MODE.

• The character mapping position will be the start point of the print area specified by

ESC W.

• The basic calculation pitch (x or y) used by the following commands varies with the

start point.

(1) If the start point is the top left or bottom right (the characters are mapped in the

direction perpendicular to the paper feed),

• Commands using x: ESC SP, ESC S, ESC ＼

• Commands using y: ESC 3, ESC J, GS $, GS ＼

(2) If the start point is the top right or bottom left (the characters are mapped in the

paper feed direction),

• Commands using x: ESC 3, ESC J, GS $, GS ＼

• Commands using y: ESC SP, ESC S, ESC ＼

[Default] ｎ＝0

[See Also] Appendix 4.1 “Explanation on PAGE MODE”

ESC $

, ESC L, ESC W, ESC ＼, GS $, GS P, GS ＼

er feed direction

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 199 200

No comments

Citizen PPU-700II Specifications Page 39