Citizen PPU-700II Specifications download pdf (Page 37)

- 35 -

ESC $ n1 n2

[Function] Specifying the absolute positions

[Code] <1B>H<24>H<n1><n2>

[Range] 0≦n1≦255

0≦n2≦255

[Outline] The printing start position is specified by the absolute position from the left margin with

the number of dots divided by 256 and quatient specified as “n2” and remainder as

“n1”.

Therefore, the printing start position is designated as [(n1+n2×256)×basic calculation

pitch] from the left margin.

[Caution] • The basic calculation pitch is set by GS P. After the line feed width is set, if the basic

calculation by GS P leaves a fraction, the fraction is corrected with the minimum pitch

of the mechanism, and the remainder is omitted.

• In STANDARD MODE, this command uses the horizontal (paper feed direction) basic

calculation pitch (x).

• In PAGE MODE, this command acts differently depending on the start point:

(1) If the start point specified by ESC T is top right or bottom left, the command

uses the vertical (paper feed direction) basic calculation pitch (y).

(2) If the start point specified by ESC T is top left or bottom right, the command

uses the horizontal (perpendicular to the paper feed direction) basic calculation

pitch (x). Specification beyond the end of the line is ignored.

[See Also] ESC ＼

, GS P, GS ＼,GS $

[Sample Program] [Print Results]

LPRINT CHR$(&H1B);"$";

LPRINT CHR$(0); CHR$(0);"A";

LPRINT CHR$(&H1B);"$";

LPRINT CHR$(50); CHR$(0);"B";

LPRINT CHR$(&H1B);"$";

LPRINT CHR$(0); CHR$(1);"C"; CHR$(&HA);

LPRINT CHR$(&H1B);"$";

LPRINT CHR$(100); CHR$(0);"A";

LPRINT CHR$(&H1B);"＼";

LPRINT CHR$(&HC2); CHR$(&HFF);"B"; CHR$(&HA)

Absolute position specified

50 100 256

A B C

A B A

Relative position specified -62

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 199 200

No comments

Citizen PPU-700II Specifications Page 37