Citizen CT-S2000 Specifications download pdf (Page 102)

- 100 -

• The maximum definition area of this printer is 2M bits (256K bytes). Multiple NV bit

images can be defined, but bit images of which total size (Bit image data + Header)

exceeds 2M bits (256K bytes) can not be defined.

• The printer state will change to BUSY just before the writing operation into the

non-volatile memory begins. Also, for a printer that have a dip switch [BUSY], the

printer state will change to BUSY just before the writing operation begins regardless

of the state of the dip switch.

• While this command is being executed, it is not possible to send ASB status or to

detect the printer status even when the ASB function is selected.

• If this command is sent while a macro is still being defined, the definition process will

be stopped and the execution of this command will start.

• NV bit images that are defined already are not initialized by using ESC @ command,

or by resetting the printer or turning the power off.

• The command only executes definition of NV bit image, but not start printing. The

printing of NV bit image will be executed by FS p.

• Because frequent writing in the non-volatile memory can destroy the memory, the

writing command should be used less than 10 times a day.

• Just after the completion of the writing operation into the non-volatile memory, the

printer hardware will be reset. Therefore, download characters, download bit images,

and macro definition will be made undefined. The receiving buffer/printer buffer will

be cleared, and each setting will go back to its default value. Then the status of dip

switches will be checked once more.

• It may happen that the printer becomes BUSY during the process of writing data into

the non-volatile memory in the execution of this command. When the printer

becomes BUSY, it will stop receiving data. Therefore, sending data from the host

(including real time command) is prohibited.

[See Also] FS p

(xL + xH x256) x8 dots = 512 dots

d97

d49057

MSB

(yL + yH x256) x8 dots = 768

dots

LSB

d96

d49152

[Example] When xL = 64, xH = 0, yL = 96, yH = 0

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 190 191

No comments

Citizen CT-S2000 Specifications Page 102