Citizen CT-S2000 Specifications download pdf (Page 112)

- 110 -

GS ( E pL pH fn [··· ]

[Function] Printer function setting command

[Outline] Printer function setting command is a command to change the function of the printer

stored on the non-volatile memory and executes the function set by the value of “fn”.

Function

No. (fn)

Function

1 Transfers to printer function setting mode. (Note)

2 Terminates printer function setting mode. (Note)

3 Sets memory switch value. (Note)

4 Sends memory switch value set.

5 Sets customize value. (Note)

6 Sends customized value set.

7 Copies user-defined page.

Defines the data in column format to the character code page of work

area.

Defines the data in raster format to the character code page of work

area.

10 Erases the data of character code page of work area.

11 Sets the communication condition of serial interface. (Note)

12 Sends the communication condition of serial interface set.

255

Sets all contents set in printer function setting mode to the state at the

time of shipment.

• pL, pH set the number of bytes following “fn” to (pL + pH 256).󳋃

• At the end of printer function setting mode (Function 2), resetting is executed. Then

the input buffer is cleared to return various kinds of setting to the state at the time of

power on.

• The set value can be confirmed without transferring to printer function setting mode

by functions 4, 6, and 12.

• Other functions do not operate without transferring to printer function setting mode.

[Caution] • This command allows writing to non-volatile memory. Therefore, using this

command frequently may result in breakage of memory. Use this command

appropriately [10 times max./day].

• During execution of this command, the printer is in Busy state and stops receiving

operation. Therefore, data transmission from the host is prohibited.

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 190 191

No comments

Citizen CT-S2000 Specifications Page 112