Citizen CT-S2000 Specifications download pdf (Page 140)

- 138 -

DLE DC4 fn m t (Specification of fn = 1)

[Function] Outputting specified pulse in real-time

[Code] <10>H<14>H<fn><m><t>

[Range] fn = 1, 0≤m≤8, 1≤t≤8

[Outline] • A signal specified with “t” is output to the connector pin specified with “m”.

m Connector Pin

0 Pin No. 2 of drawer kick-out connector

1 Pin No. 5 of drawer kick-out connector

• Set the ON time/OFF time to t x100 ms, respectively.

[Caution] • When receiving a code row coinciding with the code configuring this command, the

same operation as this command takes place and attention by the user is required.

Example: When corresponding code row is present in bit image data.

• This command must not be used between other command code rows.

Example: This command is used in the bit image data.

• This command is ignored under the following conditions.

• During sending block data

• During output of signal to drawer kick connector

• During occurrence of error

[See Also] ESC p

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 190 191

No comments

Citizen CT-S2000 Specifications Page 140