- 183 -
• MSW3-7 CBM-1000 compatible mode
[Outline] Select enable/disable of CBM-1000 compatible mode.
OFF (0) ON (1)
CBM1000 Mode Invalid Valid
ON (1) OPERATION: Enable CBM1000 compatible mode.
Control code <ESC ~ J> becomes available.
OFF (0) OPERATION: CBM1000 compatible mode is disabled.
[Default] ON (1) [Valid]
• MSW3-8 Cover open during printing
[Outline] Select the release method of cover open error during printing.
OFF (0) ON (1)
Resum Open Err Close Command
ON (1) OPERATION: Cover open error during printing becomes a return allowed error.
Returned with command <DLE ENQ n> after cover is closed.
OFF (0) OPERATION: Cover open error during printing becomes an automatic return error.
Automatically returned from cover open error by closing the cover.
[Default] OFF (0) [Close]
MSW4
• MSW4-1 Automatic length measurement
[Outline] In selecting black mark paper, set the enable/disable of automatic length measurement.
(Black mark/label support model only
OFF (0) ON (1)
BM Measure Invalid Valid
ON (1) OPERATION: Automatic length measurement is enabled.
At power-up, measurement operation is taken.
OFF (0) OPERATION: Automatic length measurement is disabled.
Operation follows the value set by <GS l>.
[Default] OFF (0) [Invalid]
• MSW4-2 Reserved [Fixed to OFF(0)]
Comments to this Manuals