Citizen CT-S2000 Specifications download pdf (Page 39)

- 37 -

ESC W xL xH yL yH dxL dxH dyL dyH

[Function] Defining the print area in PAGE MODE

[Code] <1B>H<57>H<xL><xH><yL><yH><dxL><dxH><dyL><dyH>

[Range] 0≤xL, xH, yL, yH, dxL, dxH, dyL, dyH≤255,

except for dxL = dxH = 0 or dyL = dyH = 0

[Outline] Defines the location and size of the print area.

• Horizontal start point = [(xL + xH x 256) x basic calculation pitch] inches

• Vertical start point = [(yL + yH x 256) x basic calculation pitch] inches

• Horizontal length = [(dxL + dxH x 256) x basic calculation pitch] inches

• Vertical length = [(dyL + dyH x 256) x basic calculation pitch] inches

[Caution] • When STANDARD MODE is selected, this command only executes the internal

flagging of the printer without affecting the printing in STANDARD MODE.

• If the horizontal start point or vertical start point is out of the printable area, this

command is canceled and the next data is handled as normal data.

• If the horizontal length or vertical length is 0, this command is canceled and the next

data is handled as normal data.

• The character mapping position will be the start point specified by ESC T in the print

area.

• If the “horizontal start point + horizontal length” is greater than the horizontal

printable area, the “horizontal printable area – horizontal start point” is taken as the

horizontal length.

• If the “vertical start point + vertical length” is greater than the vertical printable area,

the “vertical printable area – vertical start point” is taken as the vertical length.

• The basic calculation pitch is defined by GS P. Once defined, the print area is not

changed if the basic calculation pitch is changed by GS P.

• Fractions resulting from calculations are corrected with the minimum pitch of the

mechanism, and the remainder is omitted.

• The horizontal start point and horizontal length are calculated with the basic

calculation pitch (x). The vertical start point and vertical length are calculated with

the basic calculation pitch (y).

• The figure below illustrates the print area, where X = horizontal start point, Y =

vertical start point, Dx = horizontal length, and Dy = vertical length.

Paper feed direction

The printable area for this printer is approximately 72.070 mm (576/203 inches)

horizontally and 104 mm (831/203 inches) vertically.

[Default] xL = xH = yL = yH = 0

When paper width is 80 mm: dxL = 64, dxH = 2, dyL = 126, dyH = 6

When paper width is 58 mm: dxL = 128, dxH = 1, dyL = 126, dyH = 6

[See Also] Appendix 4.1 “Explanation on PAGE MODE”

CAN, ESC L, ESC T, GS P

(X,Y) Paper

↓ Dx

↑

(

X+D

-1

Y+D

-1

)

Print Area

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 190 191

Command Reference 1
REVISION 2
TABLE OF CONTENTS 3
CITIZEN 7
2.1.1 Description of Items 11
LF 12
CR 12
FF 13
ESC FF 14
CAN 16
ESC % n 20
ESC – n 22
ESC ? n 23
ESC E n 24
ESC G n 25
ESC M n 26
ESC V n 27
ESC t n 28
ESC { n 29
GS ! n 32
GS B n 33
GS b n 34
HT 35
ESC T n 38
Print Area 39
nL nH 40
ESC a n 41
nL nH 46
ESC 2 47
ESC 3 n 48
2.2.5 Bit Image Commands 49
GS / m 53
2.2.6 Status Commands 56
GS r n 64
2.2.8 Panel Switch Commands 68
GS : 69
2.2.10 Cutter Commands 71
ESC m 72
GS V m ........ (1) 73
GS H n 74
75
- 100 102
- 101 103
- 102 104
- 103 105
- 104 106
- 105 107
- 106 108
GS c 109
- 108 110
- 109 111
- 110 112
- 111 113
- 112 114
- 113 115
- 114 116
- 115 117
- 116 118
- 117 119
- 118 120
- 119 121
- 120 122
- 121 123
- 122 124
Page of Work Area 125
- 125 127
- 126 128
- 127 129
- 128 130
- 129 131
- 130 132
- 131 133
- 132 134
- 133 135
- 134 136
- 135 137
- 136 138
2.2.15 Other Commands 139
- 138 140
- 139 141
- 140 142
- 141 143
ESC @ 144
ESC L 145
ESC S 146
- 145 147
ESC RS 148
- 147 149
GS I n 150
- 149 151
- 150 152
3. CHARACTER CODE TABLE 153
- 152 154
- 153 155
- 154 156
- 155 157
- 156 158
- 157 159
- 158 160
- 159 161
- 160 162
- 161 163
- 162 164
- 163 165
4. APPENDIX 166
A Baseline 167
- 166 168
- 167 169
- 168 170
4.2.2 Interfacing Phases 171
4.2.3 Negotiation 172
- 171 173
- 172 174
- 173 175
- 174 176
- 175 177
4.4.1 Memory Switches 178
- 177 179
- 178 180
- 179 181
- 180 182
- 181 183
- 182 184
- 183 185
- 184 186
- 185 187
- 186 188
- 187 189
- 188 190
- 189 191

Comments to this Manuals

No comments

Citizen CT-S2000 Specifications Page 39

Comments to this Manuals

Related products and manuals for Print & Scan Citizen CT-S2000