Citizen CT-S2000 Specifications download pdf (Page 152)

- 150 -

GS P x y

[Function] Specifying the basic calculation pitch

[Code] <1D>H<50>H<x><y>

[Range] 0≤x≤255

0≤y≤255

[Outline] • This command sets the horizontal basic calculation pitch to approx. 25.4/x mm (1/x

inches), and the vertical basic calculation pitch to approx. 25.4/y mm (1/y inches).

• If x = 0, the horizontal basic calculation pitch is reverted to the default value.

• If y = 0, the vertical basic calculation pitch is reverted to the default value.

[Caution] • The horizontal direction is defined as the direction perpendicular to the paper feed,

and the vertical direction is defined as the paper feed direction.

• In STANDARD MODE, the following parameters are used regardless of the character

orientation (e.g. inverted or 90°-right-turned).

(1) Commands using x: ESC SP, ESC $, ESC

＼

, FS S, GS L, GS W

(2) Commands using y: ESC 3, ESC J

• In PAGE MODE, the parameters used depend on the character orientation, as

follows:

(1) If the start point specified by ESC T is the top left or bottom right (The characters

are mapped in the direction perpendicular to the paper feed):

• Commands using x: ESC SP, ESC $, ESC W, ESC

＼

, FS S

• Commands using y: ESC 3, ESC J, ESC W, GS $, GS

＼

(2) If the start point specified by ESC T is the top right or bottom left (The characters

are mapped in the paper feed direction):

• Commands using x: ESC 3, ESC J, ESC W, GS $, GS

＼

• Commands using y: ESC SP, ESC $, ESC W, ESC

＼

, FS S

• This command does not affect any other values that are already set.

• If calculations made in combination with another command generate fractions, the

fractions are corrected with the minimum pitch of the mechanism, and the remainder

is omitted.

[Default] x = 203, y = 360

[See Also] Appendix 4.1 “Explanation on PAGE MODE”

ESC SP, ESC $, ESC 3, ESC J, ESC W, ESC

＼

, GS $, GS L, GS W, GS

1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 190 191

Command Reference 1
REVISION 2
TABLE OF CONTENTS 3
CITIZEN 7
2.1.1 Description of Items 11
LF 12
CR 12
FF 13
ESC FF 14
CAN 16
ESC % n 20
ESC – n 22
ESC ? n 23
ESC E n 24
ESC G n 25
ESC M n 26
ESC V n 27
ESC t n 28
ESC { n 29
GS ! n 32
GS B n 33
GS b n 34
HT 35
ESC T n 38
Print Area 39
nL nH 40
ESC a n 41
nL nH 46
ESC 2 47
ESC 3 n 48
2.2.5 Bit Image Commands 49
GS / m 53
2.2.6 Status Commands 56
GS r n 64
2.2.8 Panel Switch Commands 68
GS : 69
2.2.10 Cutter Commands 71
ESC m 72
GS V m ........ (1) 73
GS H n 74
75
- 100 102
- 101 103
- 102 104
- 103 105
- 104 106
- 105 107
- 106 108
GS c 109
- 108 110
- 109 111
- 110 112
- 111 113
- 112 114
- 113 115
- 114 116
- 115 117
- 116 118
- 117 119
- 118 120
- 119 121
- 120 122
- 121 123
- 122 124
Page of Work Area 125
- 125 127
- 126 128
- 127 129
- 128 130
- 129 131
- 130 132
- 131 133
- 132 134
- 133 135
- 134 136
- 135 137
- 136 138
2.2.15 Other Commands 139
- 138 140
- 139 141
- 140 142
- 141 143
ESC @ 144
ESC L 145
ESC S 146
- 145 147
ESC RS 148
- 147 149
GS I n 150
- 149 151
- 150 152
3. CHARACTER CODE TABLE 153
- 152 154
- 153 155
- 154 156
- 155 157
- 156 158
- 157 159
- 158 160
- 159 161
- 160 162
- 161 163
- 162 164
- 163 165
4. APPENDIX 166
A Baseline 167
- 166 168
- 167 169
- 168 170
4.2.2 Interfacing Phases 171
4.2.3 Negotiation 172
- 171 173
- 172 174
- 173 175
- 174 176
- 175 177
4.4.1 Memory Switches 178
- 177 179
- 178 180
- 179 181
- 180 182
- 181 183
- 182 184
- 183 185
- 184 186
- 185 187
- 186 188
- 187 189
- 188 190
- 189 191

Comments to this Manuals

No comments

Citizen CT-S2000 Specifications Page 152

Comments to this Manuals

Related products and manuals for Print & Scan Citizen CT-S2000