- 178 -
4.4.2 Details of Memory Switches
This section describes the function of memory switch.
Memory switches with no function settings are omitted the description, though default setting shall not be
changed.
If memory switch is manually set, Error LED is lighted if MSW1 to 5 is set to on, or unlighted if set to off.
For MSW7 to 10, only lighted if factory setting is used.
MSW1
• MSW1-1: Setting the power ON notify
[Outline] At power ON, to notify the host of the printer power ON, printer can send to host 3 byte power
ON notify’s status data (<3B>H <31>H <00>H).
Set to enable/disable for sending the power ON notify’s status data.
OFF (0) ON (1)
Power ON Info Valid Not send
ON (1) OPERATION:
Function to notify power ON is disabled, sending no status to host.
OFF (0) OPERATION:
Function to notify power ON is enabled, sending status to host.
[Default] OFF (0) [Valid]
• MSW1-2: Input buffer
[Outline] Select the input buffer (receive buffer) size.
OFF (0) ON (1)
Buffer Size 4k bytes 45 bytes
ON (1) OPERATION: Input buffer size is set to 45 bytes.
From when free area decreases to 16 bytes until it increases to 26 bytes, receive buffer
is full with printer BUSY status.
OFF (0) OPERATION: Input buffer size is set to 4K bytes.
From when free area decreases to 128 bytes until it increases to 256 bytes, receive
buffer is full with printer BUSY status.
[Default] OFF (0) [4k bytes]
* For USB I/F, 4k bytes setting only enabled.
Comments to this Manuals