Citizen CT-S2000 Specifications download pdf (Page 114)

- 112 -

fn = 3: Function 3 Setting Memory Switch Value

GS ( E pL pH fn [a1 b18 ··· b11] ··· [ak bk8 ··· bk1]

[Code] <1d>H<28>H<45>H pL pH fn[a1 b18···b11]···[ak bk8···bk1]

[Range] 10≤ (pL + pH x256) ≤65535

fn = 3

a = 1, 2, 3, 4, 5

b = 48, 49, 50

[Outline] • Changes the memory switch set in a to the value set in “b”.

b Function

48 Sets corresponding bit to OFF.

49 Sets corresponding bit to ON.

50 Does not change corresponding bit.

• Setting memory with 1 (a = 1)

n b (Set Value) Function

48 (Default) Reports the power on.

49 Does not report power on.

48 (Default) Sets input buffer capacity to 4K bytes.

49 Sets input buffer capacity to 48 bytes. (Note)

48 (Default) Sets input buffer full and offline to be Busy.

49 Sets to be busy with input buffer full.

48 (Default)

At the occurrence of receiving error, replaces the data with

“?”.

49 At the occurrence of receiving error, ignores the data.

48 (Default) Disables CR (0DH).

49 Enables CR (0DH).

6 48 (Default) Reserved

48 (Default) Does not reset at serial I/F pin 6.

49 Resets at serial I/F pin 6.

48 (Default) Does not reset at serial I/F pin 25.

49 Resets sat serial I/F pin 25.

(Note) Differs with the number of columns (as much as font A full columns).

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 190 191

No comments

Citizen CT-S2000 Specifications Page 114