Citizen CT-S2000 Specifications Page 169

  • Download
  • Add to my manuals
  • Print
  • Page
    / 191
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 168
- 167 -
In Figure 4-3, a line feed occurs between “lesson” and “Test 1” because the space “ “ next to “lesson” does
not fit in the horizontal range of the 200 400󳋃 -pitch print area. The line feed width conforms to the value
specified by a command such as ESC 3.
It is possible to set as many print areas as desired before executing FF. If print areas overlap each other, the
print area setup data are ORed with the previous data.
If you want to erase a section of mapped data, use the CAN command. The CAN command erases all data in
the print area being specified. You can, therefore, use an ESC W to define a print area that encloses the
section you want to erase, and then execute the CAN command, so that the section of the data is erased.
It is important to remember that any part of a character that overlaps with the specified print area will be
erased.
< Example 2 >
100 PRINT #1, CHR$(&H1B);"L";
110 PRINT #1, CHR$(&H1B);"W"; CHR$(0); CHR$(0); CHR$(0); CHR$(0);
120 PRINT #1, CHR$(200); CHR$(0); CHR$(144); CHR$(1);
130 PRINT #1, CHR$(&H1B);"T"; CHR$(0);
140 PRINT #1, "Page mode lesson2CAN command";
150 PRINT #1, CHR$(&HA);
160 PRINT #1, "ABCDEFGHIJKLMNOPQRST1234567890";
170 PRINT #1, CHR$(&HC);
First, an ESC L is sent to switch to PAGE MODE (100th line). Next, an ESC W is used to send eight arguments,
n1 to n8, to reserve a print area. In this example, the arguments are sent in the sequence of 0, 0, 0, 0, 200,
0, 144, and 1, to reserve a print area that measures 200 from the start point (0, 0) in the “x” direction and
400 in the “y” direction (110th to 120th line). Furthermore, an ESC T is issued to specify the print direction
to be “0” (130th line).
After the above setup, print data is sent (140th to 160th line). Finally, an FF is sent (170th line) to produce
a print-out as shown in Figure 4-4 “Example 2: Result of Print”.
(0,0) 200
Page Mode lesson 2 Paper
CAN command
ABCDEFGHIJKLMNOP
QRSTU1234567890
400 Print area
Print Direction
Figure 4-4 Example 2: Result of Print
Page view 168
1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 190 191

Comments to this Manuals

No comments