Citizen PPU-700II Specifications download pdf (Page 145)

- 143 -

ESC S

[Function] Selecting STANDARD MODE

[Code] <1B>H<53>H

[Outline] Switches from PAGE MODE to STANDARD MODE.

[Caution] • This command is only effective if it is entered when in PAGE MODE.

• Any data mapped in PAGE MODE is erased.

• After this command is executed, the beginning of the line is taken as the next print

start position.

• The print area defined by ESC W is initialized.

• The commands listed below, which have separate settings for STANDARD MODE and

PAGE MODE, are changed to the settings for STANDARD MODE use.

(1) Spacing setting: ESC SP, FS S

(2) Line feed width setting: ESC 2, ESC 3

• The following commands are valid only in setting in STANDARD MODE.

(1) ESC W Sets the space amount for setting print area in PAGE MODE.

(2) ESC T Selects the printing direction of character in PAGE MODE.

(3) GS $ Sets the absolute position of character vertical direction in PAGE MODE.

• STANDARD MODE is selected when the printer is turned on or reset, or when ESC @ is

executed.

[See Also] FF

, ESC FF, ESC L

ESC RS

[Function] Sound buzzer

[Code] <1B>H<1E>H

[Outline] Sound the buzzer for 200 ms.

[Caution] • This command is buffered before execution.

• This command is ignored when MSW3-7 is ON.

[Sample Program]

LPRINT CHR$(&H1B); CHR$(&H1E);

[Execution Result]

The buzzer sounds for approx. 200 ms.

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 199 200

No comments

Citizen PPU-700II Specifications Page 145