Citizen PPU-700II Specifications Page 177

  • Download
  • Add to my manuals
  • Print
  • Page
    / 200
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 176
- 175 -
In Figure 4-3, a line feed occurs between “lesson” and “Test 1” because the space “ “ next to
“lesson” does not fit in the horizontal range of the 200×400-pitch print area. The line feed width
conforms to the value specified by a command such as ESC 3.
It is possible to set as many print areas as desired before executing FF. If print areas overlap each
other, the print area setup data are ORed with the previous data.
If you want to erase a section of mapped data, use the CAN command. The CAN command erases
all data in the print area being specified. You can, therefore, use an ESC W to define a print area
that encloses the section you want to erase, and then execute the CAN command, so that the
section of the data is erased.
It is important to remember that any part of a character that overlaps with the specified print area
will be erased.
< Example 2 >
100 PRINT #1CHR$(&H1B);"L";
110 PRINT #1CHR$(&H1B);"W";CHR$(0);CHR$(0);CHR$(0);CHR$(0);
120 PRINT #1CHR$(200);CHR$(0);CHR$(144);CHR$(1);
130 PRINT #1CHR$(&H1B);"T";CHR$(0);
140 PRINT #1"Page mode lesson2CAN command";
150 PRINT #1CHR$(&HA);
160 PRINT #1, "ABCDEFGHIJKLMNOPQRST1234567890";
170 PRINT #1, CHR$(&HC);
First, an ESC L is sent to switch to PAGE MODE (100th line). Next, an ESC W is used to send eight
arguments, n1 to n8, to reserve a print area. In this example, the arguments are sent in the
sequence of 0, 0, 0, 0, 200, 0, 144, and 1, to reserve a print area that measures 200 from the start
point (0, 0) in the “x” direction and 400 in the “y” direction (110th to 120th line). Furthermore, an
ESC T is issued to specify the print direction to be “0” (130th line).
After the above setup, print data is sent (140th to 160th line). Finally, an FF is sent (170th line) to
produce a print-out as shown in Figure 4-4 “Example 2: Result of Print”.
Figure 4-4 Example 2: Result of Print
Page mode lesson
2CAN command
ABCDEFGHIJKLMNOP
QRST1234567890
Print area
Paper
400
(0,0)
Print direction
Page view 176
1 2 ... 172 173 174 175 176 177 178 179 180 181 182 ... 199 200

Comments to this Manuals

No comments