Citizen PPU-700II Specifications download pdf (Page 38)

- 36 -

ESC D [n]k NULL

[Function] Setting horizontal tab position

[Code] <1B>H<44>H [<n>] k <00>H

[Range] 1≦ｎ≦255

0≦ｋ≦32

[Outline] Specifying a horizontal tab position.

• “n” indicates the number of columns from the beginning to the horizontal tab position.

Note, however, that “n = set position – 1”. For example, to set the position at 9th

column, n = 8 is to be specified.

• “k” denotes the number of horizontal tab positions you want to set. The tab position is

set at a position where it is “character width n” from the beginning of a line. The ・

character width, at this time, includes the space on the right. In double width

characters, it is made double the ordinary case. Tab positions that can be specified are

maximum 32. Specifying tab positions exceeding this limit is ignored. <n>k, which

denotes a setting position, is input in the increasing order and ends at <00> H.

• ESC D <NULL> clears all the set tab positions. Following clearing, the horizontal tab

(HT) command is ignored.

[Caution] • When the data, <n>k, is equal to or smaller than its preceding data, <n>k–1, it is

assumed that tab setting is finished. If this is the case, the next data onward will be

processed as normal data.

• When the data, <n>k, exceeds a 1-line print area, set the horizontal tab position, as

“Set column position = Maximum print columns + 1”.

• The horizontal tab position does not change even if the character width is altered after

setting the horizontal tab position.

[Default] At the selection of font A, tabs are set every 8 characters (at 9th, 17th, 25th, ...) with

right space amount of a character set at 0 and horizontal enlargement rate of a

character set at 1.

[See Also] HT

[Sample Program]

Refer to Sample Program and Print Results for HT.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 199 200

No comments

Citizen PPU-700II Specifications Page 38