Citizen PPU-700II Specifications download pdf (Page 94)

- 92 -

2.2.13 Printer Function Setting Commands

GS ( E pL pH fn […]

[Function] Printer function setting command

[Outline] Printer function setting command is a command to change the function of the printer

stored on the non-volatile memory and executes the function set by the value of “fn”.

Function No. Function

Function 1 Transfers to printer function setting mode.

Function 2 Terminates printer function setting mode.

Function 3 Sets memory switch value.

Function 4 Sends memory switch value set.

Function 5 Sets customize value.

Function 6 Sends customized value set.

Function 7 Copies user-defined page.

Function 8

Defines the data in column format to the character code page of

work area.

Function 9

Defines the data in raster format to the character code page of

work area.

Function 10 Erases the data of character code page of work area.

Function 11 Sets the communication condition of serial interface.

Function 12 Sends the communication condition of serial interface set.

Function 48 Erasing paper layout.

Function 49 Setting paper layout.

Function 50 Sending paper layout information.

Function 255

Sets all contents set in printer function setting mode to the state

at the time of shipment.

• pL, pH set the number of bytes following “fn” to (pL+pH×256).

• At the end of printer function setting mode (Function 2), resetting is executed. Then

the input buffer is cleared to return various kinds of setting to the state at the time of

power on.

• The set value can be confirmed without transferring to printer function setting mode

by functions 4, 6, and 12.

• Other functions do not operate without transferring to printer function setting mode.

[Caution] • This command allows writing to non-volatile memory. Therefore, using this command

frequently may result in breakage of memory. Use this command appropriately [10

times max./day].

• During execution of this command, the printer is in Busy state and stops receiving

operation. Therefore, data transmission from the host is prohibited.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 199 200

No comments

Citizen PPU-700II Specifications Page 94