Citizen PPU-700II Specifications download pdf (Page 51)

- 49 -

ESC 3 n

[Function] Setting line feed rate of minimum pitch

[Code] <1B>H<33>H<n>

[Range] 0≦ｎ 255≦

[Outline] Sets the line feed width per line to [n basic calculation pitch] inches.・

[Caution] • The line feed width can be set separately for the STANDARD and PAGE MODES.

• The basic calculation pitch is set by GS P. Once defined, the line feed width is not

changed if the basic calculation pitch is changed by GS P.

• Fractions resulting from calculation are corrected with the minimum pitch of the

mechanism, and the remainder is omitted.

• In STANDARD MODE, this command uses the vertical (paper feed direction) basic

calculation pitch (y).

• In PAGE MODE, this command acts differently depending on the start point:

(1) If the start point specified by ESC T is top left or bottom right, the command

uses the vertical (paper feed direction) basic calculation pitch (y).

(2) If the start point specified by ESC T is top right or bottom left, the command

uses the horizontal (perpendicular to the paper feed direction) basic calculation

pitch (x).

• The maximum settable line feed width is 1016 mm (40 inches). A setting greater than

this maximum is trimmed to the maximum.

[Default] When memory switch 3-7 is OFF: Line feed is approx. 4.23 mm.

When memory switch 3-7 is ON: Line feed is approx. 3.75 mm.

[See Also] ESC 2

, GS P

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 199 200

No comments

Citizen PPU-700II Specifications Page 51