Citizen PPU-700II Specifications download pdf (Page 40)

- 38 -

ESC W xL xH yL yH dxL dxH dyL dyH

[Function] Defining the print area in PAGE MODE

[Code] <1B>H<57>H<xL><xH><yL><yH><dxL><dxH><dyL><dyH>

[Range] 0≦xL, xH, yL, yH, dxL, dxH, dyL, dyH ≦255

except for dxL＝dxH＝0 or dyL＝dyH＝0

[Outline] Defines the location and size of the print area.

• Horizontal start point = [(xL + xH×256)×basic calculation pitch] inches

• Vertical start point = [(yL + yH×256) ×basic calculation pitch] inches

• Horizontal length = [(dxL + dxH×256)×basic calculation pitch] inches

• Vertical length = [(dyL + dyH×256)×basic calculation pitch] inches

[Caution] • When STANDARD MODE is selected, this command only executes the internal flagging

of the printer without affecting the printing in STANDARD MODE.

• If the horizontal start point or vertical start point is out of the printable area, this

command is canceled and the next data is handled as normal data.

• If the horizontal length or vertical length is 0, this command is canceled and the next

data is handled as normal data.

• The character mapping position will be the start point specified by ESC T in the print

area.

• If the “horizontal start point + horizontal length” is greater than the horizontal

printable area, the “horizontal printable area – horizontal start point” is taken as the

horizontal length.

• If the “vertical start point + vertical length” is greater than the vertical printable area,

the “vertical printable area – vertical start point” is taken as the vertical length.

• The basic calculation pitch is defined by GS P. Once defined, the print area is not

changed if the basic calculation pitch is changed by GS P.

• Fractions resulting from calculations are corrected with the minimum pitch of the

mechanism, and the remainder is omitted.

• The horizontal start point and horizontal length are calculated with the basic

calculation pitch (x). The vertical start point and vertical length are calculated with the

basic calculation pitch (y).

• The figure below illustrates the print area, where X = horizontal start point, Y =

vertical start point, Dx = horizontal length, and Dy = vertical length.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 199 200

No comments

Citizen PPU-700II Specifications Page 40