Citizen PPU-700II Specifications download pdf (Page 97)

- 95 -

• Setting memory switch 2 (a = 2)

Bit b (Set Value) Function

1 49 (Default) Reserved

48 Disables auto cutter.

49 (Default) Enables auto cutter.

48 Enables stored printing.

49 (Default) Disables stored printing.

48 Sets printing at full columns to be the same as CBM1000.

49 (Default) Sets printing at full columns to be the same as EPSON.

48 (Default) After cover close and PE recovery, prints as it is.

After cover close and PE recovery, prints from the

beginning using PAGE MODE, barcode, image,

double-height printing, etc. as a unit.

6 48 (Default) Reserved

7 48 (Default) Reserved

48 (Default) Enables PNE.

49 Disables PNE.

• Setting memory switch 3 (a = 3)

Bit b (Set Value) Function

48 (Default) After clearing cutter error, can be restored by Feed SW.

After clearing cutter error, cannot be restored by Feed

SW.

48 (Default)

When selecting cover open error as recoverable error,

recovered by cover close.

When selecting cover open error as recoverable error,

recovered by command.

48 (Default) Resets with parallel pin 31.

49 Does not reset with parallel pin 31.

48 (Default) Uses thermal paper.

49 Uses Black mark paper.

5 48 (Default) Reserved

6 48 (Default) Reserved

48 (Default) Sets PPU compatible mode.

49 Sets L90 compatible mode.

48 (Default) Sets cover open error during printing to be auto recovery

Sets cover open error during printing to be recoverable

error.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 199 200

No comments

Citizen PPU-700II Specifications Page 97